The robustness of old wood

Back in late June of 2015, my church cut off substantial portions a major section of a leopard tree on the church grounds.

I grabbed a few of the larger pieces -- but because I didn't have time to slab them (by hand!) at the time, I put them in my kids' wading pool and filled it with water.

And now, late December of 2016 -- so, literally a year and a half later -- I finally slabbed the last one!


I had them soaking in water to "stop the clock" and this gave me time to slab 'em: I have a one person crosscut saw that I re-filed to rip -- but it still takes me about a half hour per slice to slab them.

I was pleased that none of them rotted. **No** splitting or checking occurred in the interim.


Here's a snapshot of the yechy-looking outside (blue garden hose for size reference)...

and the purty-looking inside (after a few swipes of sandpaper and a quick rub of oil).

Note that I scrubbed off the "pond gunk" with a wire brush prior to sawing -- leaned the log up against something for a few hours to dry, prior to sawing.


I'm just offering this experience as a data point for anyone who has a chunk of wood that they want to "put on hold" for a while.

If you don't have a wading pool, I presume an old ice chest, a dis-used garbage can, and etc. would also work.


--GG

Turning logs into lumber

On Tuesday morning of this week, I noticed a pile of short logs on the footpath.  The city workers had been coming through and trimming branches that posed a hazard to the power lines:  they must've taken down a tree as well.

So, on Tuesday evening I stopped by.  I mostly have enough wood -- but I couldn't bear to pass these up.  Plus, they had a pink-y coloring that I thought might be useful.

I chose two of the wider, longer pieces and put them in the kids' wading pools until the weekend:  if you let logs dry out before you split them, they start cracking -- which ruins the usefulness of the resulting lumber.

This next photo shows the "kit" that I used.  I had a chopping block (another short log), and I put the "new" log on top, and hewed off the bark using the hatchet.  Then I used the two splitting wedges and the heavy hammer to split the log into eighths.

For the initial, "full-diameter" split, I used the handsaw to define the split line.  For the remaining splits, I "walked" the wider chisel across the length of the wedge to create a faultline, then used the wedges the complete the split.

The split "drifted" a little bit as it passed through the log, such that the exiting portion wasn't as straight as the entry point.  But, that's OK.

Then, because the wood still had a bit of sap to it -- it's summer here, so the sap was "up" -- I'm seeing whether soaking the resulting blanks in the kids' wading pool for a week will dilute some of the sap.

(Note to environmental types:  most of this water is rainwater from the recent storm -- although I did "top it up" a bit.)


Once these blanks have soaked for a week or so, I'll put them somewhere out of the weather for two or three years, to season.  Once I decide to use them, I'll convert them to boards with a scrub plane (you'll get the notion in the first 30 seconds), and turn them into a box, set of small shelves, or -- something.

--GG